Well Test Offshore Package

  1. 1 x 3” 10Kpsi Flowhead with swivel in 2.7-1 basket with stiff joints, crossovers, test cap, kill line crossover including lifting sling set.
  2. 1 x 3” 10Kpsi Choke manifold on 2.7-3 skid with test caps, set choke beans, bean wrench, grease pump, grease bucket including lifting sling set.
  3. 2 X 3” 1502 10Kpsi data headers with 2 x thermowell and 4 x pressure ports.
  4. 1 x 3” 10Kpsi Hydraulic Surface Safety Valve in 2.7-1 frame with lifting sling set.
  5. 1 x 3” 10Kpsi Coflexip PTL Flow line hose with Coflon liner, 3”1502 connections, 50ft long, SS external armour and handling collars in DNV 2.7-1 basket.
  6. 1 x 2” 10Kpsi Coflexip DST Kill line hose with Rilsan liner, 2”1502 connections, 60ft long, SS external armour and handling collars inDNV 2.7-1 basket.
  7. 1 x 3Kpsi Emergency Shutdown Panel, twin outlet with hydraulic hoses, remote pull buttons, pressure pilots, pilot hoses and fittings.
  8. 1 x 15Kpsi Pressure test pump with chart recorder, set hoses and fittings.
  9. 1 x 10Kpsi Chemical injection pump with tank in SS frame.
  10. 1 x Set of 10Kpsi Dead Weight Tester with set of weights, 10Kpsi Surface Pressure Recorder (12” chart) and Ranarex gasgravitometer for SG range of 0.5 to 2.0. (See Note#1 below)
  11. 1 x 3” 5Kpsi, 4MMBtu Steam exchanger heater in CSC / DNV frame including lifting sling set, Inlet, outlet and bypass manifold with gate valves, Fully insulated steam inlet pipework and vessel, Steam bath temperature controller, steam trap, Vessel protected by pilot operated PSV safety valve and rupture disc and including Ex lighting with power supply cable.
  12. 1 x 1440psi / 42” x 10ft horizontal Separator in CSC / DNV frame including lifting sling set, Inlet, outlet and bypass manifold to oil and gas outlets, 6” Daniel orifice gas metering with Barton recorder and set of orifice plates, 2” & 1” Nu-Flo oil metering and 1” Nu-Flo water metering with digital readouts, Vessel protected by twin pilot operated PSV safety valves and including Ex lighting with power supply cable.
  13. 1 x 50psi / 80 Bbl single compartment vertical Surge tank in CSC / DNV frame including lifting sling set. Inlet, outlet and bypass manifold with ball valves, sight glasses, hi-lo level alarms, steam coil and including Ex-lighting with power supply cable.
  14. 1 x 100Bbl Twin compartment Gauge tank in CSC / DNV frame including lifting sling set, Inlet, outlet and bypass manifold with butterfly valves, sight glasses, flame arrester, rupture disc, steam coil.
  15. 1 x 5000BPD / 100psi Transfer pump in frame including lifting sling set, centrifugal type pump with outlet check valve. Drive by Ex electrical motor drive and On / Off switch box including power supply cable.
  16. 2 x 3 section Burner boom/ King post assemblies with option of 60 or 90 ft lengths. Supplied with 1440psi / 15000 BOPD , 4 head Oil burners in frame with isolation ball valves for oil and air on each head and check valves on oil and air inlet lines. Includes gas pilot ignition system on each head with push button and power supply cable. Boom pipework consists 3 “206 for air , oil and water, 4 “206 for vent and 6”206 for main gas line. King post assembly is supplied with boom support spreader plate for cable hanging system , tie bars and deck plates.
  17. 1 x Set of ball valve diverter manifolding on base skids with lifting sling sets. Consists of 1 x 3” 1440psi 5 valve Oil manifold / 1 x 3” 1440psi 2 valve Gas manifold / 1 x 4” 1440psi 2 valve Vent manifold.
  18. 1 x Set of pipework supplied on set of 4 DNV 2.7-1 pipe racks with lifting slings sets. Consists of 3”1502 10Kpsi pipework x 150ft / 3”602 5Kpsi pipework x 100ft / 4”602 5Kpsi pipework x 100ft / 3”206 2Kpsi pipework x 300ft / 4”206 2Kpsi pipework x 300ft. Supplied with elbows, tees and crossovers for each size and pressure rating.
  19. 2 x 12ft DNV 2.7-1 General cargo baskets with payload capacity of 8000Kgs including the lifting sling set.
  20. 1 x 20ft ISO CSC hazardous area Office container fully pressurized to Zone 1 / A60 / DNV 2.7-1 and DNV 2.7-2 including lifting sling set. Fully insulated, air conditioned with desks, drawers, over head cupboards, bench seat / storage box, single external access door and window, fridge, fire extinguisher. Supplied with 50 meters supply cable , external isolator, 15 KVA transformer with input range of 380-690V, voltage stabilizer and output range of 110-220V.
  21. 1 x 10ft DNV 2.7-1 Zone 1 rated Workshop / Storage container with standard container double doors including lifting sling set. Supplied with steel workbench with cupboards and drawers, storage racks, bench vice, toolboard, whiteboard, wall mounted cooling fan. Includes 50 meters power supply cable , external isolator and 220V internal sockets.

Standalone Equipment – Ex-stock Subject to Prior Sale

  • 1 x 60ft Skid Mounted Hydraulic 2 section Vertical Flare Stack – 8″ Main gas line
  • 1 x 40ft Trailer mounted Hydraulic 2 section Vertical Flare Stack – 6″ Main gas line
  • 4 x 3,000 BPD, 150psi Screw type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 2 x 4,000 BPD, 300psi Screw type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 4 x 5,000 BPD, 150psi Centrifugal type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 2 x 10,000 BPD, 250psi Centrifugal type Oil Transfer Pumps – Eexd Zone 1, Nace trim
  • 3 x Onshore Burner Heads with 15,000 BPD capacity with ignition system in Crash frame
  • 1 x Set of 3″1502 x 50ft and 2″1502 x 60ft 10,000psi Flow and Kill line CoflexipCoflon hoses in DNV baskets
  • 1 x Set of 3″16BX Hub x 60ft and 2″16BX Hub x 60ft 10,000psi Flow and Kill line CoflexipCoflon hose in DNV basket
  • 2 x Sets of Wireless Data Acquisition systems including Pressure, Temperature and Flow transmitters
  • 3 x Sets of 3,000psi ESD and 15,000psi PTP Panels with hydraulic hoses and accessories
  • 3 x Sets of Ancillaries including Chemical Injection Pump, DWT, Pressure Recorder and Ranarex Gas Gravitometer
  • 3 x Sets of Operational Spare parts and accessories

 

Standard package

  • Flowhead
  • Coflexip Hoses
  • Surface Safety Valve
  • Data Headers
  • Choke Manifold
  • Chemical Injection Pump
  • Dead Weight Tester
  • Pressure Recorder
  • Gas Gravitometer
  • Steam Exchanger (Offshore)
  • Indirect Water bath Heater (Onshore)
  • Separator
  • Surge Tank
  • Gauge Tank
  • Transfer pump
  • Oil & Gas Diverter Manifolds
  • Burner, Boom and King Post (offshore)
  • Burner (onshore)
  • Interconnecting pipe work in Pipe Racks
  • Workshop Container
  • Office Container Pressurized (Offshore)
  • Office Container non pressurized (Onshore)
  • Data Acquisition Systems

Components may be customized to specific customer demand.