Well Test Onshore Package

  1. 1 x 3” 10Kpsi Flowhead with swivel in DNV 2.7-1 basket with set of stiff joints, string crossovers, test cap, kill line check valve and crossover and including lifting sling set.
  2. 1 x 3” 10Kpsi Choke manifold on DNV 2.7-3 skid with test caps, set choke beans, bean wrench, grease pump, grease bucket including lifting sling set.
  3. 2 X 3” 1502 10Kpsi integral data headers with 2 x thermowell ports and 4 x pressure ports with needle valves, check valve, pressure and temperature gauges.
  4. 1 x 3” 10Kpsi Hydraulic Surface Safety Valve in 2.7-1 frame with lifting sling set.
  5. 1 x 3” 10Kpsi Coflexip PTL Flow line hose with Coflon liner, 3”1502 connections, 50ft long, SS external armour and handling collars in DNV 2.7-1 basket.
  6. 1 x 2” 10Kpsi Coflexip DST Kill line hose with Rilsan liner, 2”1502 connections, 60ft long, SS external armour and handling collars inDNV 2.7-1 basket.
  7. 1 x 3Kpsi Emergency Shutdown Panel, twin outlet with hydraulic hoses, remote pull buttons, pressure pilots, pilot hoses and fittings.
  8. 1 x 15Kpsi Pressure test pump with chart recorder, set hoses and fittings.
  9. 1 x 10Kpsi Chemical injection pump with tank in SS frame.
  10. 1 x Set of 10Kpsi Dead Weight Tester with set of weights, 10Kpsi Surface Pressure Recorder (12” chart) and Ranarex gasgravitometer for SG range of 0.5 to 2.0. (See Note#1 below)
  11. 1 x 3” 5Kpsi / 2MMBtu Indirect water bath heater in CSC / DNV 2.7-1 frame including lifting sling set, Inlet, outlet and bypass manifold with gate valves, Diesel / Gas dual fuel, dual stage burner with HC gas detection burner shutdown system and including Ex lighting with power supply cable.
  12. 1 x 1440psi / 42” x 10ft horizontal Separator in CSC / DNV 2.7-1 frame including lifting sling set, Inlet, outlet and bypass manifold to oil and gas outlets, 6” Daniel orifice gas metering with Barton recorder and set of orifice plates, 2” & 1” Nu-Flo oil metering and 1” Nu-Flo water metering with digital readouts, Vessel protected by twin pilot operated PSV safety valves and including Ex lighting with power supply cable.
  13. 1 x 50psi / 80 Bbl single compartment vertical Surge tank in CSC / DNV 2.7-1 frame including lifting sling set. Inlet, outlet and bypass manifold with ball valves, sight glasses, hi-lo level alarms, steam coil and including Ex lighting with power supply cable.
  14. 1 x 100Bbl Twin compartment Gauge tank in CSC / DNV 2.7-1 frame including lifting sling set, Inlet, outlet and bypass manifold with butterfly valves, sight glasses, flame arrester, rupture disc, steam coil.
  15. 1 x 5000BPD / 100psi Transfer pump in frame including lifting sling set, centrifugal type pump with outlet check valve. Drive by Ex electrical motor drive and On / Off switch box including power supply cable.
  16. 2 x 1440psi / 15000 BOPD , 4 head Oil burners in frame including lifting sling set, isolation ball valves for oil and air on each head with check valves on oil and air inlets and including gas pilot ignition system on each head supplied with push button and power supply cable.
  17. 1 x Set of ball valve diverter manifolding on base skids with lifting sling sets. Consists of 1 x 3” 1440psi 5 valve Oil manifold / 1 x 3” 1440psi 2 valve Gas manifold / 1 x 4” 1440psi 2 valve Vent manifold.
  18. 1 x Set of pipework supplied on set of 4 x DNV 2.7-1 pipe racks with lifting slings sets. Consists of 3”1502 10Kpsi pipework x 150ft / 3”602 5Kpsi pipework x 100ft / 4”602 5Kpsi pipework x 100ft / 3”206 2Kpsi pipework x 300ft / 4”206 2Kpsi pipework x 300ft. Supplied with elbows, tees and crossovers for each size and pressure rating.
  19. 2 x 12ft DNV 2.7-1 General cargo baskets with payload capacity of 8000Kgs including the lifting sling set.
  20. 1 x 20ft Safe area Office and Workshop converted container supplied with lifting sling set. Split into two equal sized 10ft work spaces with Office side fully insulated, air conditioned, desks, drawers, over head cupboards, bench seat / storage box, single external access door and window, fridge, fire extinguisher, 220 / 110V sockets with UPS for DAQ system. Workshop side with standard container double doors, steel workbench with cupboards and drawers, storage racks, bench vice, toolboard, whiteboard, wall mounted cooling fan, 220V sockets.

Standalone Equipment – Ex-stock Subject to Prior Sale

  • 1 x 60ft Skid Mounted Hydraulic 2 section Vertical Flare Stack – 8″ Main gas line
  • 1 x 40ft Trailer mounted Hydraulic 2 section Vertical Flare Stack – 6″ Main gas line
  • 4 x 3,000 BPD, 150psi Screw type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 2 x 4,000 BPD, 300psi Screw type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 4 x 5,000 BPD, 150psi Centrifugal type Oil Transfer Pumps – Eexd Zone 1, Nace Trim
  • 2 x 10,000 BPD, 250psi Centrifugal type Oil Transfer Pumps – Eexd Zone 1, Nace trim
  • 3 x Onshore Burner Heads with 15,000 BPD capacity with ignition system in Crash frame
  • 1 x Set of 3″1502 x 50ft and 2″1502 x 60ft 10,000psi Flow and Kill line CoflexipCoflon hoses in DNV baskets
  • 1 x Set of 3″16BX Hub x 60ft and 2″16BX Hub x 60ft 10,000psi Flow and Kill line CoflexipCoflon hose in DNV basket
  • 2 x Sets of Wireless Data Acquisition systems including Pressure, Temperature and Flow transmitters
  • 3 x Sets of 3,000psi ESD and 15,000psi PTP Panels with hydraulic hoses and accessories
  • 3 x Sets of Ancillaries including Chemical Injection Pump, DWT, Pressure Recorder and Ranarex Gas Gravitometer
  • 3 x Sets of Operational Spare parts and accessories

 

Standard package

  • Flowhead
  • Coflexip Hoses
  • Surface Safety Valve
  • Data Headers
  • Choke Manifold
  • Chemical Injection Pump
  • Dead Weight Tester
  • Pressure Recorder
  • Gas Gravitometer
  • Steam Exchanger (Offshore)
  • Indirect Water bath Heater (Onshore)
  • Separator
  • Surge Tank
  • Gauge Tank
  • Transfer pump
  • Oil & Gas Diverter Manifolds
  • Burner, Boom and King Post (offshore)
  • Burner (onshore)
  • Interconnecting pipe work in Pipe Racks
  • Workshop Container
  • Office Container Pressurized (Offshore)
  • Office Container non pressurized (Onshore)
  • Data Acquisition Systems

Components may be customized to specific customer demand.